
BBS RSII series
BBS RS830
- Size7x17"
- PCD5x112
- OffsetET50
- Centre bore66.5 mm
This page covers the BBS RS830, one wheel from the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 7x17 inches and is listed for MB A.
On the BBS RS830, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
At ET50 the BBS RS830 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
At 17 inches, the BBS RS830 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Note on record: RSM.
For the history behind the BBS RS830, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS830 | 5x112 | 17 | 7 | 50 | 66.5 | — | — | MB A | RSM |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit