BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS831

  • Size8.5x17"
  • PCD5x120
  • OffsetET50
  • Centre bore72.5 mm

The BBS RS831 belongs to the RS II family of two-piece mesh wheels. It measures 8.5x17 inches and is listed for BMW e36, e46, z3.

On the BBS RS831, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

ET50 is a high offset for the BBS RS831, so it tucks well inside the arch, as front-drive and most modern cars need. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

At 17 inches, the BBS RS831 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: RSM.

More on where the BBS RS831 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS831 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8315x120178.55072.5——BMW e36, e46, z3RSM

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models