
BBS RSII series
BBS RS832
- Size8x17"
- PCD5x110
- OffsetET35
- Centre bore65.1 mm
This page covers the BBS RS832, one wheel from the RS II range, which kept the mesh look of the RS on a two-piece construction. Size is 8J x 17 and is listed for Opel.
On the BBS RS832, the 5x110 PCD is the one used by Saab, Alfa Romeo and Opel; the 65.1 mm centre bore matches Peugeot and Citroën hubs.
ET35 is a high offset for the BBS RS832, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting a 17-inch BBS RS832, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: RSM.
More on where the BBS RS832 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS832 | 5x110 | 17 | 8 | 35 | 65.1 | — | — | Opel | RSM |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit