BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS833

  • Size8x17"
  • PCD5x108
  • OffsetET38
  • Centre bore65.1 mm

This page covers the BBS RS833, one wheel from the RS II, the two-piece successor to the original RS. It is a 17-inch wheel, 8 inches wide and is listed for Volvo.

On the BBS RS833, the 5x108 PCD is the one used by Ford, Volvo, Jaguar and Peugeot; the 65.1 mm centre bore matches Peugeot and Citroën hubs.

ET38 is a high offset for the BBS RS833, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

Before fitting a 17-inch BBS RS833, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: RSM.

For the history behind the BBS RS833, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS833 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8335x1081783865.1——VolvoRSM

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models