BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS835

  • Size7.5x17"
  • PCD5x114.3
  • OffsetET40

This page covers the BBS RS835, one wheel from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is a 17-inch wheel, 7.5 inches wide and is listed for toyota, honda, mazda.

On the BBS RS835, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

ET40 is a high offset for the BBS RS835, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

At 17 inches, the BBS RS835 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: RSM.

No centre bore figure is recorded for the BBS RS835. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS RS835, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS835 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8355x114.3177.540———toyota, honda, mazdaRSM

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models