
BBS RSII series
BBS RS836
- Size8sx17"
- PCD5x114.3
- OffsetET40
This page covers the BBS RS836, one wheel from the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 8sx17 inches.
The 5x114.3 bolt pattern of the BBS RS836 is the one used by many Japanese and Korean cars.
ET40 is a high offset for the BBS RS836, so it tucks well inside the arch, as front-drive and most modern cars need.
Before fitting a 17-inch BBS RS836, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: RSM.
No centre bore or fitment figure is recorded for the BBS RS836. Read the markings on the back of the wheel before relying on it.
For the history behind the BBS RS836, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS836 | 5x114.3 | 17 | 8s | 40 | — | — | — | — | RSM |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit