
BBS RSII series
BBS RS857
- Size10x18"
- PCD5x114.3
- OffsetET37
This page covers the BBS RS857, one wheel from the RS II family of two-piece mesh wheels. Size is 10J x 18.
The 5x114.3 bolt pattern of the BBS RS857 is the one used by many Japanese and Korean cars.
ET37 is a high offset for the BBS RS857, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
Before fitting an 18-inch BBS RS857, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: hinodex.
The centre bore and fitment of the BBS RS857 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS857 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS857 | 5x114.3 | 18 | 10 | 37 | — | — | — | — | hinodex |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit