BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS858

  • Size8.5x20"
  • PCD5x120
  • OffsetET14
  • Centre bore72.5 mm

The BBS RS858 belongs to the RS II, the two-piece successor to the original RS. Size is 8.5J x 20 and is listed for BMW e63.

The 5x120 bolt pattern of the BBS RS858 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

The BBS RS858 has a low ET14 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

Before fitting a 20-inch BBS RS858, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: 101 style bmw.

More on where the BBS RS858 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS858 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8585x120208.51472.5——BMW e63101 style bmw

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models