BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS862

  • Size8x19"
  • PCD5x120
  • OffsetET37
  • Centre bore72.5 mm

The BBS RS862 belongs to the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 8x19 inches and is listed for BMW e90.

On the BBS RS862, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

ET37 is a high offset for the BBS RS862, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 19 inches, the BBS RS862 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: 101 style bmw.

More on where the BBS RS862 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS862 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8625x1201983772.5——BMW e90101 style bmw

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models