BBS RT style illustration
Illustration of the BBS RT design; no photo of this exact part number.

BBS RT series

BBS RT013

  • Size7x16"
  • PCD5x112
  • OffsetET24
  • Centre bore66.5 mm
  • Lip1"
  • Barrel5.5"

The BBS RT013 belongs to the BBS RT range. It is a 16-inch wheel, 7 inches wide and is listed for MB.

On the BBS RT013, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

The BBS RT013 uses ET24, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

At 16 inches, the BBS RT013 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RT013: lip 1", barrel 5.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

Note on record: 3piece, Lorinser.

For the history behind the BBS RT013, how to spot a genuine wheel and what to check when buying used, see the BBS RT series guide.

Specifications

BBS RT013 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RT0135x1121672466.51"5.5"MB3piece, Lorinser

Size in inches, offset and bore in mm. How to read these figures.

All BBS RT models