BBS RT wheel
BBS RT wheel. Photo: BBS RT700 (RT) by Hipwell, CC BY-SA 3.0, via Wikimedia Commons.

Bolted mesh design, 1990s

BBS RT wheels

The RT is one of the bolted cross-spoke wheels BBS sold alongside the RS family. It turns up mostly on European cars from the 1990s, and like the RS it was made in many specifications, which are listed by part number in the tables below.

249 part numbers on record, 14–21", 4x100, 5x112, 5x120, 5x114.3, 5x130 and 8 more bolt patterns. Jump to the model table.

Era
Mainly 1990s
Design
Cross-spoke mesh with bolted construction
Family
Sits alongside the RS and RS II
Sizes
Varied by market and car
Identification
RT part number marked on the centre

The RT in context

BBS was founded in 1970 in Schiltach by Heinrich Baumgartner and Klaus Brand. Its road wheels drew on its racing work, and the cross-spoke mesh became the look most people link with the name. The RS, introduced in 1983, was the best known of these wheels. Through the late 1980s and 1990s BBS built a family of related mesh designs for different cars, budgets and sizes. The RT is one of them.

It is less famous than the RS, and less written about. In the used market it often appears on cars that were popular in Europe at the time, and it is sometimes sold as an RS by sellers who see a gold mesh centre and assume. The two are different wheels with their own part numbers. If you are buying, the distinction affects which tables you use and what sizes the wheel was built in. Background on the company is in BBS history.

Construction

The RT uses a bolted construction: a mesh centre held to the rim by a ring of bolts near the edge. How many pieces a given RT has can depend on the specification, so look at the wheel itself rather than assuming. If there is a joint running around the rim between an outer lip and an inner barrel, you are looking at a three-piece wheel. If the rim is one piece with the centre bolted inside it, it is a two-piece.

Bolted wheels share some traits. A single centre design can be built into different widths and offsets, which is why there are so many variants. They also have joints that need sealing, hardware that needs correct torque, and more places for corrosion to start than a one-piece cast wheel. For a general comparison of construction methods, see forged and cast BBS wheels.

How to tell an RT apart

The RT shares the family look of the BBS mesh wheels, so the face alone is not always enough. The reliable checks are on the back of the wheel.

  • Read the part number on the centre. An RT is marked RT followed by digits, where an RS is marked RS.
  • Note the construction, whether a two-piece or three-piece rim.
  • Measure the diameter and width, and compare them with the listings.

Centre caps are a weak guide because they are swapped between sets all the time. Mesh copies are also common, and many copy the general BBS look without matching any one model. A copy is often a one-piece casting with fake bolts moulded into the face and no proper markings on the back. If the wheel has real bolts, a real rim joint where expected and a part number on the centre, it is very likely genuine. Our guide to identifying BBS wheels covers markings across the ranges.

Finishes you are likely to see

RT wheels left the factory in finishes typical of BBS mesh wheels of the period, and many have been refinished since. Gold and silver centres are common on the used market, often paired with polished or machined rims. After decades of use many sets have been repainted in other colours, from black to anthracite to bright colours that suited a particular car.

A refinished set is not a problem in itself, but it hides what was underneath. Ask who did the work and whether the wheels were split before refinishing. A wheel painted assembled may have old corrosion sealed in between the parts, and that can show up later as bubbling around the bolts.

Part numbers and markings

The tables below are organised by RT part number. Each number refers to a specification: the diameter, width, offset, bolt pattern and centre bore the wheel was built to. Some were intended for particular car makers or models.

To find the number, take the wheel off and clean the back of the centre. Brake dust, old weights and layers of paint from previous refinishing can hide it. You may also find size markings, approval marks that depend on the market, and other production information. Photograph everything before you start looking things up.

On a multi-piece wheel the rim parts may have been replaced during a rebuild, so the number on the centre tells you how the wheel left the factory, not necessarily how it is now. Measure the width and offset yourself before relying on a table.

Sizes and fitment

RT wheels were made in sizes to suit the cars of their time, so expect diameters at the smaller end by modern standards and bolt patterns that match the European cars they were sold for. Exact sizes varied by market and car. The tables list the specification for each part number.

Before you fit a set:

  1. Confirm the bolt pattern and centre bore, and use hub rings if the bore is larger than the hub.
  2. Check the offset. Older wheels often have lower offsets than modern cars use.
  3. Check brake clearance. Mesh centres from this period may not clear larger modern calipers.
  4. Use bolts or nuts with the seat type the wheel needs.

Our fitment and offset guide explains how offset and width decide where the tyre sits.

Fitting older wheels to a newer car

Many RT wheels end up on cars newer than the ones they were made for. That can work well, but it needs more checking than buying wheels built for your car. Newer cars often use different bolt patterns, larger centre bores and higher offsets, and their brakes are usually bigger.

Bolt pattern is the first barrier. If it does not match, the wheel does not fit, and adapters that change pattern add width and another set of joints to the hub. Treat them with caution and use good quality parts from a known supplier if you go that way. A larger centre bore on the wheel can be dealt with using hub rings. A smaller bore cannot be fixed by a ring and would need machining, which should only be done by someone who knows the wheel.

Offset is the next issue. A wheel with a lower offset than the car expects sits further out, which can make the tyre stand proud of the arch and changes how the steering feels. Spacers move the wheel out, never in, so they cannot correct an offset that is already too low. If the offsets in the tables are a long way from your car's original figure, look for a different part number.

Finally, try a wheel on the car before committing to a full set if you can. Turn the steering to full lock both ways and check the gap between the back of the spokes and the caliper. A test fit is the only certain check.

Buying used RT wheels

Most RT wheels for sale are old, and many have been refinished, repaired or put together from more than one set. Ask for photos of the backs as well as the faces, including the part numbers and the inside of each rim. A seller who will not show the backs is a reason to be careful.

Look for kerb damage on the lip, bends in the inner barrel, corrosion around the bolts and under the paint on the centre, and signs of a failing seal, such as residue around the joint. Seized or mismatched bolts suggest the wheel will need a full rebuild. If possible, see the wheels spun on a balancer.

Check that the specifications suit your car before you buy. A set listed as an RS that turns out to be an RT may still be a good buy, but it should be priced and checked as what it actually is. See the used buying guide for a fuller checklist.

Refurbishment

Like other bolted BBS wheels, the RT can be split, refinished and rebuilt. A thorough job involves separating the parts, stripping and refinishing the centre and rim, fitting new hardware, resealing the joints and pressure-testing the wheel before balancing. Refinishing the wheel assembled is less costly but cannot reach corrosion between the parts.

Use a refurbisher who has done multi-piece wheels before and who tightens the hardware evenly to the right torque. Our guide to refurbishing three-piece wheels covers the process, and most of it applies to two-piece wheels as well.

Looking after RT wheels

Brake dust sits in every corner of a mesh centre, and left there it damages the finish. Clean the wheels regularly with a pH-neutral wheel cleaner and a soft brush. Avoid strong acid products, which can attack polished surfaces, paint and hardware.

Check tyre pressures often. A slow leak on an old bolted wheel is usually a seal, and it is easier to deal with early. Clean and dry the wheels before storing them. More advice is in caring for BBS wheels.

Using the variant listings

The tables below give the specification for each RT part number. Use them to identify a wheel or to find one that suits your car, and measure the wheel before relying on the listing, since rebuilds and mixed sets are common. Related mesh designs are covered on the RS, RS II and RS-GT pages, and the full catalogue is at all rim models.

All BBS RT models

249 models
ModelSizePCDOffsetCB (mm)Fitment
BBS RT0096x14"4x100ET3857VW golf 2 GTI
BBS RT0137x16"5x112ET2466.5MB
BBS RT0148x16"5x112ET1166.5MB
BBS RT0159x16"5x112ET1166.5MB
BBS RT0167.5x16"5x112ET3366.5MB
BBS RT0178x16"5x112ET3566.5MB
BBS RT01810x16"5x112ET1166.5MB
BBS RT0198x16"5x112ET2266.5MB
BBS RT0228x16"5x120ET2072.5BMW
BBS RT0239x16"5x120ET2472.5BMW
BBS RT0288x17"5x112ET3566.5MB
BBS RT0298.5x17"5x112ET1366.5MB
BBS RT0328.5x17"5x120ET1372.5BMW
BBS RT0368.5x16"5x112ET2266.5MB
BBS RT0378.5x16"5x112ET1966.5MB
BBS RT0388.5x17"5x112ET2266.5MB
BBS RT0398.5x17"5x112ET1966.5MB
BBS RT0419.5x17"5x112ET2466.5MB
BBS RT0457.5x17"5x112ET4266.5MB
BBS RT0468.5x18"5x112ET4466.5MB
BBS RT0477x16"5x114.3ET4560—
BBS RT0487x16"5x114.3ET33——
BBS RT0497x16"5x114.3ET30——
BBS RT0507x16"5x114.3ET33——
BBS RT0518x16"5x114.3ET52——
BBS RT0538x16"5x114.3ET38——
BBS RT0548x16"5x114.3ET35——
BBS RT0558x16"5x114.3ET39——
BBS RT0568x16"5x114.3ET35——
BBS RT0588x16"5x114.3———
BBS RT0619x16"5x114.3ET39——
BBS RT0629x16"5x114.3ET20——
BBS RT0638x16"5x114.3ET42——
BBS RT0649x16"5x114.3ET40——
BBS RT0658x16"5x114.3ET35——
BBS RT0669x16"5x114.3ET40——
BBS RT0739x18"centerlockET38.5—Bugatti EB110
BBS RT07412x18"centerlockET51.2—Bugatti EB110
BBS RT0758x17"5x120ET2072.5BMW e34
BBS RT0769x17"5x120ET2272.5BMW e34
BBS RT0777.5x17"5x120ET4172.5BMW e36, Z3
BBS RT0818x17"5x120ET1572.5BMW
BBS RT0828x17"5x120ET4072.5BMW e36
BBS RT0839x17"5x120ET1572.5BMW
BBS RT0847.5x17"5x112ET4266.5MB
BBS RT1009.5x17"6x139.7ET26110.2Toyota Hilux
BBS RT1019x17"5x120ET2674.1BMW e39
BBS RT1029.5x17"5x114.3ET1771.6—
BBS RT1039.5x17"5x114.3ET2672.5Range Rover
BBS RT1049.5x17"5x130ET2684.1MB w461 G
BBS RT1058.5x18"5x112ET2566.5MB r129
BBS RT10610x18"5x112ET2566.5MB r129
BBS RT1078x17"5x120ET2074.1BMW e39
BBS RT1088x17"5x100/112ET3257.1VAG, audi
BBS RT1107.5x17"5x100ET3257.1VAG, audi
BBS RT1118x18"5x120ET20—BMW
BBS RT1129x18"5x120ET24—BMW
BBS RT1138.5x18"5x120ET1374.1BMW e39
BBS RT11410x18"5x120ET2074.1BMW e39
BBS RT1158.5x18"5x120ET3472.5BMW
BBS RT1178.5x18"5x112ET3257.1VAG, audi
BBS RT1199.5x17"6x139ET17110—
BBS RT1228.5x18"5x120ET3872.5BMW
BBS RT1239x18"5x120ET3272.5BMW
BBS RT1248.5x18"5x120ET2272.5BMW
BBS RT12510x18"5x120ET2572.5BMW
BBS RT1378.5x18"5x130ET45—Porsche
BBS RT13810x18"5x130ET50—Porsche
BBS RT1397.5x18"5x130ET50—Porsche GT3, 911, 996
BBS RT14010x18"5x130ET65—Porsche GT3, 911, 996
BBS RT1439x18"5x130ET52—Porsche GT3, 911, 996
BBS RT14410x18"5x112ET4066.5MB
BBS RT14510x18"—ET35——
BBS RT1569x20"5x120.6ET30—Jaguar
BBS RT15710x20"5x120.6ET25—Jaguar
BBS RT1588x18"5x130ET52—Porsche GT3, 911, 996
BBS RT1597.5x17"5x112ET5266.5MB
BBS RT1607.5x17"5x112ET3557VAG
BBS RT1628x18"5x120—74.1BMW e39
BBS RT1639x18"5x120—74.1BMW e39
BBS RT1648x18"5x120ET2072.5BMW e38
BBS RT1659.5x18"5x120ET2572.5BMW e38
BBS RT1669x20"5x120.6ET30—Jaguar
BBS RT16710x20"5x120.6ET25—Jaguar
BBS RT1688.5x18"5x120.6ET33—Jaguar
BBS RT1708x18"5x120.6ET60—Jaguar
BBS RT1719x18"5x112ET5266.6MB
BBS RT1728x18"5x112ET4466.6MB
BBS RT1748.5x19"5x112ET4466.6MB
BBS RT1759.5x19"5x112ET4666.6MB
BBS RT1767x17"5x110ET49—Saab
BBS RT1787.5x17"5x112ET3766.5MB
BBS RT1798.5x17"5x112ET3466.5MB
BBS RT1807x17"5x112ET5766.5MB
BBS RT1828x18"5x130ET50—Porsche 911, 996
BBS RT183185x130——Porsche 911, 996
BBS RT18411x18"5x130ET63—Porsche 911, 996
BBS RT18511x18"5x130ET45—Porsche 911, 996
BBS RT1868x18"5x130ET50—Porsche 911, 996
BBS RT1878.5x18"5x130ET45—Porsche 911, 996
BBS RT1919.5x18"5x112ET2366.5MB, R129
BBS RT1977x17"5x112ET3757.1VW, vag
BBS RT2038x18"5x112———
BBS RT2057.5x17"5x112ET3657.1Audi a4/a6, vag
BBS RT2068.5x18"5x112ET2566.5MB, e500
BBS RT2079.5x18"5x112ET2366.5MB, e500
BBS RT2099.5x19"5x108ET5063.3Jaguar
BBS RT2118x18"5x108ET38—Ford
BBS RT2129x20"5x120.6——Jaguar XKR
BBS RT21310x20"5x120.6ET25—Jaguar XKR
BBS RT2148x18"5x108ET59—Jaguar X type
BBS RT2157.5x18"5x108ET52.5—Jaguar X type
BBS RT2177.5x17"5x112ET3666.5MB CLK
BBS RT2218.5x18"5x112ET3257.1Audi, vag
BBS RT2228x18"5x120ET4772.5BMW
BBS RT2238.5x18"5x120ET5072.5BMW
BBS RT2269x20"5x108ET49—Jaguar
BBS RT2288x18"5x114.3ET30——
BBS RT2298.5x18"5x100ET3257.1Audi, vag
BBS RT2308.5x18"5x120ET3872.5BMW, 3 series
BBS RT2317.5x18"5x108ET52.5—Jaguar
BBS RT2338x18"5x112ET4057.1Audi, vag
BBS RT2348.5x20"5x120ET58—Land Rover
BBS RT2357x17"—ET50—Land Rover
BBS RT2368.5x18"5x112ET3257.1Audi, vag
BBS RT2388x19"5x114.3ET43.5—Ferrari 612 Scaglietti
BBS RT23910x19"5x114.3ET51.1—Ferrari 612 Scaglietti
BBS RT2427.5x18"5x112ET5457.1VAG, VW mk5
BBS RT2458.5x18"5x120ET14—BMW
BBS RT24610x18"5x120ET25—BMW
BBS RT2479x20"5x108ET30—Jaguar
BBS RT2497.5x17"5x112ET4757.1VAG, VW, WESTWOOD
BBS RT2508x18"5x112ET4857.1VAG, Audi
BBS RT2567x18"4x100ET5256.1MINI, R109 John Cooper Works Double-Spoke
BBS RT2669x20"5x112ET41—Bentley
BBS RT2759.5x21"5x112ET41—Bentley
BBS RT7008x17"5x112ET3557.1VAG
BBS RT7018x17"5x120ET3872.5BMW
BBS RT7028x17"5x112ET4566.5MB

Where a model has several size versions, the first is shown here; the model page lists them all.

Also catalogued without recorded specs

BBS RT001, BBS RT002, BBS RT003, BBS RT004, BBS RT005, BBS RT006, BBS RT007, BBS RT008, BBS RT010, BBS RT011, BBS RT012, BBS RT020, BBS RT021, BBS RT030, BBS RT031, BBS RT033, BBS RT034, BBS RT035, BBS RT040, BBS RT042, BBS RT043, BBS RT044, BBS RT052, BBS RT057, BBS RT059, BBS RT060, BBS RT067, BBS RT068, BBS RT069, BBS RT070, BBS RT071, BBS RT072, BBS RT078, BBS RT079, BBS RT080, BBS RT085, BBS RT086, BBS RT087, BBS RT088, BBS RT089, BBS RT090, BBS RT091, BBS RT092, BBS RT093, BBS RT094, BBS RT095, BBS RT096, BBS RT097, BBS RT098, BBS RT099, BBS RT109, BBS RT116, BBS RT118, BBS RT120, BBS RT121, BBS RT169, BBS RT173, BBS RT177, BBS RT188, BBS RT189, BBS RT190, BBS RT192, BBS RT193, BBS RT194, BBS RT195, BBS RT196, BBS RT198, BBS RT199, BBS RT200, BBS RT201, BBS RT202, BBS RT204, BBS RT208, BBS RT210, BBS RT216, BBS RT218, BBS RT219, BBS RT220, BBS RT224, BBS RT225, BBS RT227, BBS RT232, BBS RT237, BBS RT240, BBS RT241, BBS RT243, BBS RT244, BBS RT248, BBS RT251, BBS RT252, BBS RT253, BBS RT254, BBS RT255, BBS RT257, BBS RT258, BBS RT259, BBS RT260, BBS RT261, BBS RT262, BBS RT263, BBS RT264, BBS RT265, BBS RT267, BBS RT268, BBS RT269, BBS RT270, BBS RT271, BBS RT272, BBS RT273, BBS RT274

Frequently asked questions

Is a BBS RT the same as an RS?

No. They are separate models with their own part numbers, although both use a mesh design. The number on the centre tells you which you have.

Where is the RT part number?

On the centre, usually on the back. Remove the wheel and clean off brake dust and dirt to read it.

Is the RT two-piece or three-piece?

Check the wheel. A joint around the rim between lip and barrel means three-piece; a one-piece rim with a bolted centre means two-piece.

Can RT wheels be refurbished?

Yes. Like other bolted BBS wheels they can be split, refinished, resealed and rebuilt by an expert.

Related