
BBS RT series
BBS RT015
- Size9x16"
- PCD5x112
- OffsetET11
- Centre bore66.5 mm
- Lip2.5"
- Barrel6"
This page covers the BBS RT015, one wheel from the BBS RT series. It is a 16-inch wheel, 9 inches wide and is listed for MB.
The 5x112 bolt pattern of the BBS RT015 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
The BBS RT015 has a low ET11 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
Before fitting a 16-inch BBS RT015, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RT015: lip 2.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
Note on record: 3piece, Lorinser.
More on where the BBS RT015 came from and how it is built is on the BBS RT page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RT015 | 5x112 | 16 | 9 | 11 | 66.5 | 2.5" | 6" | MB | 3piece, Lorinser |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit