
BBS RT series
BBS RT250
- Size8x18"
- PCD5x112
- OffsetET48
- Centre bore57.1 mm
BBS RT250 is a part number from the BBS RT family of wheels. It measures 8x18 inches and is listed for VAG, Audi.
On the BBS RT250, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57.1 mm centre bore matches VW Group hubs.
ET48 is a high offset for the BBS RT250, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting an 18-inch BBS RT250, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: 2piece.
More on where the BBS RT250 came from and how it is built is on the BBS RT page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RT250 | 5x112 | 18 | 8 | 48 | 57.1 | — | — | VAG, Audi | 2piece |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit