
BBS RT series
BBS RT170
- Size8x18"
- PCD5x120.6
- OffsetET60
This page covers the BBS RT170, one wheel from the BBS RT range. It is an 18-inch wheel, 8 inches wide and is listed for Jaguar.
On the BBS RT170, the 5x120.6 PCD sets which hubs it can bolt to.
ET60 is a high offset for the BBS RT170, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting an 18-inch BBS RT170, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: 2piece.
No centre bore figure is recorded for the BBS RT170. Read the markings on the back of the wheel before relying on it.
More on where the BBS RT170 came from and how it is built is on the BBS RT page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RT170 | 5x120.6 | 18 | 8 | 60 | — | — | — | Jaguar | 2piece |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit