
BBS RT series
BBS RT138
- Size10x18"
- PCD5x130
- OffsetET50
This page covers the BBS RT138, one wheel from the BBS RT range. It is an 18-inch wheel, 10 inches wide and is listed for Porsche.
On the BBS RT138, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz.
At ET50 the BBS RT138 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
Before fitting an 18-inch BBS RT138, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: 2piece, Classix.
No centre bore figure is recorded for the BBS RT138. Read the markings on the back of the wheel before relying on it.
More on where the BBS RT138 came from and how it is built is on the BBS RT page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RT138 | 5x130 | 18 | 10 | 50 | — | — | — | Porsche | 2piece, Classix |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit