
BBS RT series
BBS RT230
- Size8.5x18"
- PCD5x120
- OffsetET38
- Centre bore72.5 mm
BBS RT230 is a part number from the BBS RT series. Size is 8.5J x 18 and is listed for BMW, 3 series.
The 5x120 bolt pattern of the BBS RT230 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
At ET38 the BBS RT230 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.
Before fitting an 18-inch BBS RT230, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: 2piece, MS design.
More on where the BBS RT230 came from and how it is built is on the BBS RT page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RT230 | 5x120 | 18 | 8.5 | 38 | 72.5 | — | — | BMW, 3 series | 2piece, MS design |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit