
BBS RT series
BBS RT160
- Size7.5x17"
- PCD5x112
- OffsetET35
- Centre bore57 mm
BBS RT160 is a part number from the BBS RT range. It measures 7.5x17 inches and is listed for VAG.
The 5x112 bolt pattern of the BBS RT160 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57 mm centre bore decides whether you need hub-centric rings.
ET35 is a high offset for the BBS RT160, so it tucks well inside the arch, as front-drive and most modern cars need. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.
Before fitting a 17-inch BBS RT160, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: 1piece.
For the history behind the BBS RT160, how to spot a genuine wheel and what to check when buying used, see the BBS RT series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RT160 | 5x112 | 17 | 7.5 | 35 | 57 | — | — | VAG | 1piece |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit