
BBS RT series
BBS RT180
- Size7x17"
- PCD5x112
- OffsetET57
- Centre bore66.5 mm
This page covers the BBS RT180, one wheel from the BBS RT series. It measures 7x17 inches and is listed for MB.
On the BBS RT180, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
At ET57 the BBS RT180 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
Before fitting a 17-inch BBS RT180, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: 2piece.
For the history behind the BBS RT180, how to spot a genuine wheel and what to check when buying used, see the BBS RT series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RT180 | 5x112 | 17 | 7 | 57 | 66.5 | — | — | MB | 2piece |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit