BBS RT style illustration
Illustration of the BBS RT design; no photo of this exact part number.

BBS RT series

BBS RT144

  • Size10x18"
  • PCD5x112
  • OffsetET40
  • Centre bore66.5 mm

The BBS RT144 belongs to the BBS RT range. It measures 10x18 inches and is listed for MB.

The 5x112 bolt pattern of the BBS RT144 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

ET40 is a high offset for the BBS RT144, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.

At 18 inches, the BBS RT144 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: 2piece, Delta.

More on where the BBS RT144 came from and how it is built is on the BBS RT page.

Specifications

BBS RT144 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RT1445x11218104066.5——MB2piece, Delta

Size in inches, offset and bore in mm. How to read these figures.

All BBS RT models