BBS RT style illustration
Illustration of the BBS RT design; no photo of this exact part number.

BBS RT series

BBS RT032

  • Size8.5x17"
  • PCD5x120
  • OffsetET13
  • Centre bore72.5 mm
  • Lip2"
  • Barrel6"

The BBS RT032 belongs to the BBS RT series. Size is 8.5J x 17 and is listed for BMW.

The 5x120 bolt pattern of the BBS RT032 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

The BBS RT032 has a low ET13 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

At 17 inches, the BBS RT032 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RT032 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

Note on record: 3piece, Lorinser, 16 centers.

The BBS RT overview covers the background of the BBS RT032 and its siblings, their construction and buying tips.

Specifications

BBS RT032 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RT0325x120178.51372.52"6"BMW3piece, Lorinser, 16 centers

Size in inches, offset and bore in mm. How to read these figures.

All BBS RT models