
BBS RT series
BBS RT019
- Size8x16"
- PCD5x112
- OffsetET22
- Centre bore66.5 mm
- Lip1.5"
- Barrel6"
The BBS RT019 belongs to the BBS RT series. It measures 8x16 inches and is listed for MB.
On the BBS RT019, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.
An offset of ET22 puts the BBS RT019 in the usual range for European saloons of its era. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
At 16 inches, the BBS RT019 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The BBS RT019 is a multi-piece wheel, so the lip and barrel are separate parts: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
Note on record: 3piece, Lorinser.
More on where the BBS RT019 came from and how it is built is on the BBS RT page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RT019 | 5x112 | 16 | 8 | 22 | 66.5 | 1.5" | 6" | MB | 3piece, Lorinser |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit