BBS RT style illustration
Illustration of the BBS RT design; no photo of this exact part number.

BBS RT series

BBS RT018

  • Size10x16"
  • PCD5x112
  • OffsetET11
  • Centre bore66.5 mm
  • Lip3"
  • Barrel6.5"

The BBS RT018 belongs to the BBS RT series. It is a 16-inch wheel, 10 inches wide and is listed for MB.

The 5x112 bolt pattern of the BBS RT018 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

With ET11 on the BBS RT018, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

Before fitting a 16-inch BBS RT018, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

BBS RT018 multi-piece build: lip 3", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

Note on record: 3piece, Lorinser.

For the history behind the BBS RT018, how to spot a genuine wheel and what to check when buying used, see the BBS RT series guide.

Specifications

BBS RT018 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RT0185x11216101166.53"6.5"MB3piece, Lorinser

Size in inches, offset and bore in mm. How to read these figures.

All BBS RT models