BBS RT style illustration
Illustration of the BBS RT design; no photo of this exact part number.

BBS RT series

BBS RT037

  • Size8.5x16"
  • PCD5x112
  • OffsetET19
  • Centre bore66.5 mm
  • Lip2"
  • Barrel6"

The BBS RT037 belongs to the BBS RT range. Size is 8.5J x 16 and is listed for MB.

On the BBS RT037, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW; the 66.5 mm centre bore decides whether you need hub-centric rings.

The BBS RT037 uses ET19, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

At 16 inches, the BBS RT037 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The BBS RT037 is a multi-piece wheel, so the lip and barrel are separate parts: lip 2", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

Note on record: 3piece, Lorinser.

More on where the BBS RT037 came from and how it is built is on the BBS RT page.

Specifications

BBS RT037 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RT0375x112168.51966.52"6"MB3piece, Lorinser

Size in inches, offset and bore in mm. How to read these figures.

All BBS RT models