
BBS RT series
BBS RT235
- Size7x17"
- OffsetET50
BBS RT235 is a part number from the BBS RT series. Size is 7J x 17 and is listed for Land Rover.
ET50 is a high offset for the BBS RT235, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
At 17 inches, the BBS RT235 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Note on record: 2piece.
No centre bore or PCD figure is recorded for the BBS RT235. Read the markings on the back of the wheel before relying on it.
More on where the BBS RT235 came from and how it is built is on the BBS RT page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RT235 | — | 17 | 7 | 50 | — | — | — | Land Rover | 2piece |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit