
BBS RT series
BBS RT140
- Size10x18"
- PCD5x130
- OffsetET65
The BBS RT140 belongs to the BBS RT range. It is an 18-inch wheel, 10 inches wide and is listed for Porsche GT3, 911, 996.
On the BBS RT140, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz.
At ET65 the BBS RT140 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
Before fitting an 18-inch BBS RT140, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: 2piece.
The centre bore of the BBS RT140 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS RT140 came from and how it is built is on the BBS RT page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RT140 | 5x130 | 18 | 10 | 65 | — | — | — | Porsche GT3, 911, 996 | 2piece |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit