
BBS RX series
BBS RX001
- Size8x17"
- PCD5x120
- OffsetET35
BBS RX001 is a part number from the BBS RX series. Size is 8J x 17.
The 5x120 bolt pattern of the BBS RX001 is the one used by BMW and some Land Rover and Honda.
At ET35 the BBS RX001 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 17-inch BBS RX001, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore and fitment of the BBS RX001 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
For the history behind the BBS RX001, how to spot a genuine wheel and what to check when buying used, see the BBS RX series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RX001 | 5x120 | 17 | 8 | 35 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit