BBS RX style illustration
Illustration of the BBS RX design; no photo of this exact part number.

BBS RX series

BBS RX037

  • Size8x17"
  • PCD5x114.3
  • OffsetET35
  • Lip1"
  • Barrel6.5"

This page covers the BBS RX037, one wheel from the BBS RX range. It is a 17-inch wheel, 8 inches wide.

The 5x114.3 bolt pattern of the BBS RX037 is the one used by many Japanese and Korean cars.

ET35 is a high offset for the BBS RX037, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 17 inches, the BBS RX037 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Lip and barrel recorded for the BBS RX037: lip 1", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

Note on record: Strosek.

The centre bore and fitment of the BBS RX037 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS RX037 came from and how it is built is on the BBS RX page.

Specifications

BBS RX037 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RX0375x114.317835—1"6.5"—Strosek

Size in inches, offset and bore in mm. How to read these figures.

All BBS RX models