
BBS RX series
BBS RX055
- Size8x17"
- PCD5x120
- OffsetET35
- Centre bore72.5 mm
- Lip1.5"
- Barrel6"
BBS RX055 is a part number from the BBS RX series. It measures 8x17 inches and is listed for BMW.
On the BBS RX055, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.
At ET35 the BBS RX055 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 17-inch BBS RX055, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RX055: lip 1.5", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
Note on record: Kerscher.
More on where the BBS RX055 came from and how it is built is on the BBS RX page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RX055 | 5x120 | 17 | 8 | 35 | 72.5 | 1.5" | 6" | BMW | Kerscher |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit