
BBS RS series
BBS RS287
- Size8.5x18"
- PCD5x112
- OffsetET13
- Centre bore72.5 mm
- Lip2"
- Barrel6"
The BBS RS287 belongs to the RS, a three-piece cross-spoke mesh wheel first sold in the 1980s. It is an 18-inch wheel, 8.5 inches wide and is listed for MB 126.
The 5x112 bolt pattern of the BBS RS287 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 72.5 mm centre bore matches BMW hubs.
With ET13 on the BBS RS287, the mounting face is close to the centre line, which pushes the wheel out towards the arch lip. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.
Before fitting an 18-inch BBS RS287, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Lip and barrel recorded for the BBS RS287: lip 2", barrel 6". You need these figures to order replacement rim halves or rebuild the wheel to a new width.
Note on record: 17" center (doublestep).
More on where the BBS RS287 came from and how it is built is on the BBS RS page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS287 | 5x112 | 18 | 8.5 | 13 | 72.5 | 2" | 6" | MB 126 | 17" center (doublestep) |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit