BBS RX style illustration
Illustration of the BBS RX design; no photo of this exact part number.

BBS RX series

BBS RX009

  • Size8x16"
  • PCD5x114.3
  • OffsetET30
  • Centre bore60 mm
  • Lip1"
  • Barrel6.5"

BBS RX009 is a part number from the BBS RX range. Size is 8J x 16.

On the BBS RX009, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

The BBS RX009 uses ET30, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

At 16 inches, the BBS RX009 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RX009 multi-piece build: lip 1", barrel 6.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

Note on record: Strosek.

The fitment of the BBS RX009 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS RX009 came from and how it is built is on the BBS RX page.

Specifications

BBS RX009 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RX0095x114.316830601"6.5"—Strosek

Size in inches, offset and bore in mm. How to read these figures.

All BBS RX models