BBS RX style illustration
Illustration of the BBS RX design; no photo of this exact part number.

BBS RX series

BBS RX010

  • Size9x16"
  • PCD5x114.3
  • OffsetET41
  • Centre bore60 mm
  • Lip1"
  • Barrel7.5"

This page covers the BBS RX010, one wheel from the BBS RX series. It is a 16-inch wheel, 9 inches wide.

The 5x114.3 bolt pattern of the BBS RX010 is the one used by many Japanese and Korean cars; the 60 mm centre bore decides whether you need hub-centric rings.

At ET41 the BBS RX010 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 16 inches, the BBS RX010 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

BBS RX010 multi-piece build: lip 1", barrel 7.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

Note on record: Strosek.

The fitment of the BBS RX010 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

The BBS RX overview covers the background of the BBS RX010 and its siblings, their construction and buying tips.

Specifications

BBS RX010 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RX0105x114.316941601"7.5"—Strosek

Size in inches, offset and bore in mm. How to read these figures.

All BBS RX models