BBS CK wheel
BBS CK wheel. Photo: BBS CK500 by Hipwell, CC BY-SA 3.0, via Wikimedia Commons.

Cast road wheel

BBS CK wheels

The CK is one of the lesser-documented BBS cast wheels. Detailed factory data is hard to pin down, so this page focuses on what you can check on the wheel itself and how to judge a set before you buy.

Construction
One-piece cast aluminium
Family
BBS C-series road wheels
Successor
CK2 shares the name; check details before mixing
Maker
BBS

What we know, and what we don't

BBS has used short two-letter codes beginning with C for many of its cast one-piece designs. The CK is one of them. Beyond that, reliable published information on its launch year, full size list and original prices is thin, and we would rather say so than guess. If you own a set, the markings on the back are a more trustworthy record than most forum posts.

A later CK2 exists. The shared name suggests a family link, but treat them as separate wheels when you are trying to match a pair or find a replacement.

Telling a genuine BBS from a copy

BBS designs are among the most copied in the wheel world, and less costly copies turn up with BBS caps fitted. On a genuine one-piece BBS you should find the BBS name and a model or part code moulded into the casting, plus size and ET markings. Copies often have crude or missing markings, rough casting on the inside of the barrel and inconsistent paint behind the spokes.

  • Feel the back of the spokes: genuine castings are cleanly finished.
  • Look for a TÜV or KBA approval number on wheels sold in Germany.
  • Weigh one wheel if you can and compare with another known BBS cast wheel of the same size. Big differences are a warning sign.

Hub rings and centre bore

Many BBS aftermarket cast wheels were made with a common large centre bore and adapted to each car with a hub-centric ring. With a used CK set it is worth asking whether the rings are included and what size they are. Running without them leaves the wheel located only by the bolts, which can cause a shake at motorway speed even when the wheels are balanced. Rings are inexpensive to replace, but you need the right inner and outer diameters.

Bolts and seats

Aftermarket wheels do not always use the same bolt seat as factory wheels. Some cars use a radius (ball) seat, others a 60-degree taper. Fitting the wrong bolts can let the wheel work loose. When a CK set comes off a different car, check the seat on the wheel and buy bolts to suit, at the correct thread length for your hubs.

Condition checks

On a cast mesh-style wheel the many small openings collect brake dust and road salt, and corrosion often starts under the lacquer at the edges of the spokes. Bubbling paint there is worth noting. Check the inner barrel for bends, and ask for the tyre date codes if tyres are included. Our page on caring for BBS wheels covers cleaning busy spoke designs without damaging the finish.

Choosing tyres

Tyre choice affects how a CK set looks as much as the wheel does. A tyre that is too narrow for the rim width stretches and leaves the rim edge exposed to kerbs, while one that is too wide bulges and can rub. Tyre makers publish approved rim width ranges for each size, so check the width marked on the wheel against those figures. For road use, staying close to the car maker's overall rolling diameter keeps the speedometer and traction systems accurate. If the wheels came with tyres, read the four-digit DOT date code on the sidewall: the first two digits are the week, the last two the year. Tyres older than about six to ten years are best replaced whatever the tread depth, as the rubber hardens with age.

When fitting new tyres, ask the fitter to use a machine that grips from the inside or protects the outer lip. Cast BBS faces scratch easily on older tyre machines.

Frequently asked questions

Is the CK the same as the CK2?

They share a name but should be treated as different wheels when matching a set. Check the markings and spoke design on each.

Where is the size marked?

On the back of a BBS cast wheel, usually on a spoke or the inner barrel, along with the ET offset.

Do I need hub rings?

If the wheel's centre bore is larger than your car's hub, yes. Hub rings centre the wheel and help prevent vibration.

Can I fit my old bolts?

Only if the seat type and length are right for the new wheel. Check before fitting.

Related