
Cast one-piece
BBS CK2 wheels
The CK2 is a follow-on to the CK name in BBS's cast road range. Published details on it are patchy, so treat the wheel's own markings as the reference and use this page as a checklist.
- Construction
- One-piece cast aluminium
- Related model
- BBS CK
- Detailed specs
- Not confirmed here; check wheel markings
- Maker
- BBS
A second-generation name
When BBS adds a number to an existing name, it usually marks a revised design rather than a straight copy. The RS and RS II are the best-known example. The CK2 seems to follow the same idea within the cast range, but we have not found a factory source we trust that explains exactly what changed from the CK. If you need a replacement wheel for a damaged set, match by the model code and size on the back, not by the name in an advert.
Matching a single replacement wheel
Buying one wheel to replace a damaged one is common with cast BBS models, and it is where mistakes happen. Two wheels with the same name can differ in width, offset, bolt pattern and finish. Before buying, photograph the back of your existing wheel and send it to the seller, asking them to do the same. Check:
- The model and part code.
- Diameter, width and ET.
- Bolt pattern and centre bore.
- Finish colour. Silver shades varied over the years, and a newer refinish may not match an older one.
If the finish does not match, refinishing all four together is often less costly than chasing an exact match.
Offset and width
Offset moves the wheel in or out of the arch. A few millimetres change can be the difference between a clean fit and a tyre that rubs on the inner liner or the arch lip. If you are fitting a CK2 set from another car, compare its ET and width with your factory wheels. The offset guide explains how to work out where the tyre will sit.
Tyres and TPMS
Many cars now rely on tyre pressure sensors. Some read through the ABS system and need nothing in the wheel, while others use a sensor on the valve. If your car uses valve sensors, check the valve hole on the CK2 accepts your sensor type, and budget for coding them if you are moving to a new set. This catches out a lot of people buying second-hand wheels.
Refinishing cast BBS wheels
One-piece cast wheels are the easiest BBS type to refurbish. A good shop will chemically strip or blast the old coating, check the wheel for runout, repair minor kerb damage and powder coat or wet paint it. Ask whether they will mask the markings on the back, so you keep the record of size and offset. Welding repairs on cast wheels are controversial, and many shops will not weld a crack on a road wheel at all.
Storage and seasonal use
Cast one-piece wheels such as the CK2 are often used as a second set, either for winter or as a road set alongside track wheels. If you plan winter use, check that your finish can cope with salt. A plain painted silver finish is easier to touch up than polished or diamond-cut faces, which tend to corrode along the machined edges once the clear coat is chipped. Wash winter wheels often, including the inner barrel, and apply a wheel sealant at the start of the season. Before storing them, clean off all brake dust, because the iron particles in it keep etching the lacquer while the wheels sit in a garage.
Valves and pressure
Fit new valves with new tyres. Rubber snap-in valves perish over time and can split, especially on cars driven fast. If your car uses TPMS sensors, the sensor's valve stem, nut and seal also have a service life, and many fitters replace the service kit at each tyre change. Check tyre pressures cold once a month. A slow leak on a cast BBS wheel often comes from a corroded bead seat or a tired valve, both easy fixes if found early.
Frequently asked questions
Is the CK2 a forged wheel?
No. It is a one-piece cast wheel from the BBS road range.
Will a CK wheel match a CK2?
Not reliably. Treat them as different wheels and compare markings before mixing.
Do CK2 wheels take TPMS sensors?
That depends on the valve hole and your sensor type. Check before buying if your car uses valve-mounted sensors.
Where can I find the offset?
Look for the ET marking on the back of the wheel.