BBS CF wheel
BBS CF wheel.

Lesser-known cast line

BBS CF wheels

The CF is one of the quieter names in the BBS catalogue. Good factory documentation is scarce, so this page sticks to what an owner or buyer can verify directly.

Construction
One-piece cast aluminium (C-series)
Documentation
Limited; specs not confirmed here
Maker
BBS

Why some BBS models are hard to research

BBS has produced a large number of designs since it started making wheels in the 1970s, and many cast models were sold for only a few years or only in some markets. Some were also made for particular car makers' accessory programmes. That leaves gaps. For the CF we have not found a reliable source for its exact launch year, size range or spoke design, and we would rather tell you that than fill the page with guesses. The wheel in front of you is the best evidence.

What to ask a seller

With a less common model, the questions you ask matter more than the advert text. Ask for:

  • Clear photos of the back of each wheel, showing all markings.
  • The car the wheels came off, and whether they were fitted with hub rings.
  • A photo of each wheel spinning on a balancer, or at least a statement on whether they run true.
  • Details of any refurbishment, and who did it.

A seller who cannot photograph the backs is worth treating with caution.

Accessory and OE-supplied wheels

BBS has made wheels for car manufacturers as factory fitment or dealer options. These wheels sometimes carry the car maker's part number and logo cap, with BBS marked on the casting. If your CF wheels have a car maker's cap, it may be worth searching that maker's part number as well, since dealer parts catalogues can confirm the size and original application.

Matching sizes

Read the diameter, width and ET from each wheel. Staggered sets, with wider rears, are common on rear-wheel-drive cars, so a set of four may not be four identical wheels. Check that front and rear tyres are the right sizes for each width, and that your car's handbook allows rotation if you plan to swap wheels front to back. Our offset guide helps work out clearance.

Repairs and refinishing

A cast CF is refurbished like any other one-piece alloy wheel: strip, repair, check runout, coat. Because replacements for uncommon models are hard to find, a straightening job is often worth doing even if it costs more than it would on a common wheel. If a wheel is cracked, look for another used one rather than a weld repair. See the used buying guide for more checks.

Telling it apart from copies

A rarely seen BBS name is a gift to anyone selling copies, because buyers have few references to compare with. Copy wheels often carry stickers or caps instead of moulded markings, and the casting on the back of the spokes is rough or porous. Genuine BBS cast wheels usually show neat, sharp lettering in the casting. If the seller says the wheels are BBS but cannot show any brand marking on the casting, assume they are not. Weight is another clue: very heavy wheels for their size suggest a lower-grade casting, though without factory data for the CF you can only compare with similar BBS cast wheels.

Fitting checklist

Once you have a CF set and know its markings, run through a short list before the first drive. Fit one bare wheel to the front hub and turn it through a full rotation to check caliper clearance. Fit the correct hub rings. Use bolts with the right seat and enough thread engagement, which on most cars means at least as many turns as the thread diameter in millimetres. Torque in a star pattern with a torque wrench, then drive gently for a few miles and re-check. Listen for rubbing on full steering lock and over bumps. If everything is quiet, the set is ready for normal use.

Keep a note of the torque used and the date, alongside your photos of the markings. It helps the next person who works on the car.

Frequently asked questions

What years was the BBS CF made?

We have not been able to confirm the production years from a reliable source. The date stamp on the wheel gives the casting date of that example.

Is the CF a genuine BBS?

BBS used the CF name, but always check the casting markings to rule out copies.

How can I find the original car application?

If the wheels carry a car maker's part number, a dealer parts catalogue may confirm it.

Can a cracked CF be welded?

Many refurbishers will not weld cracks on road wheels. Replacing the wheel is usually the safer choice.

Related