BBS SX wheel
Illustration of the BBS SX spoke layout (drawn for this site, not a product photo).

Cast one-piece, Design Line

BBS SX wheels

The SX is a cast double-spoke wheel from the BBS Design Line, sold in a small number of finishes such as black and silver for everyday European cars.

Construction
One-piece cast aluminium
Range
Design Line
Spoke style
Double spokes
Finishes
Crystal Black, Brilliant Silver and others by market
Typical cars
BMW, Audi, VW, Mercedes-Benz

Background

BBS introduced the SX as an addition to its design-focused range, close in price and purpose to the SR. Where the SR has an open centre, the SX uses pairs of spokes for a busier, more technical face. It was aimed at the same buyers: drivers of saloons, estates and hatchbacks who want an aftermarket wheel with a known maker behind it.

Construction

The SX is cast in one piece using a pressure casting process. Descriptions differ on the exact method, with low-pressure casting the most common. The spokes are back-milled to remove material that does not carry load. Some sellers describe the SX as flow-formed; the BBS literature we have seen describes it as cast, so treat flow-forming claims with caution unless they come from BBS. See forged vs cast.

Fitment

Fitments covered common European bolt patterns in a range of diameters. Sizes varied by market. Hub rings and specific bolts may be needed, and load rating should be checked on heavier cars. Read the offset guide before changing width.

Identifying an SX

From the front, the SX shows paired spokes and comes mainly in black or silver. The back has the BBS model code, size, offset and test marks. Because the wheel is close in price and purpose to the SR, sellers sometimes confuse the two; the SR has an open centre and the SX uses double spokes. Check the code on the back rather than the listing title.

SX alongside the SR and XR

The SX, SR and XR are all cast one-piece wheels for everyday cars. They share the same basic approach: a pressure casting process, back-milled spokes and test certification. The differences are mainly in the face design and which cars each was offered for. The SX has the busiest face of the three because of its double spokes, which gives it a sportier look but makes it slower to clean.

If you plan to use the wheels through winter, the simpler faces of the SR or XR are easier to keep clean. For a summer set on a saloon or estate, the SX suits owners who want a look closer to a factory sports option.

Sizes and offsets differ between the three models and between markets, so check the current list for your car. Used sets are worth checking for load rating as well as size, especially if they came off a heavier car.

Finishes and matching

The SX has been sold mainly in black and silver, with names varying by market. Black shows dust and chips sooner but suits darker cars. Silver hides brake dust well between washes. If you are replacing a single damaged wheel, try to match the finish name and production period, since colours can shift slightly between batches. A refinisher can blend a repaired wheel, but an exact match on silver is hard to achieve, so it may be easier to refinish all four at once.

Keep a note of the finish name from the original paperwork if you have it.

What goes wrong on used sets

Crystal Black and similar dark finishes show chips and swirl marks more than silver. Look for corrosion inside the narrow channel between each spoke pair, where dirt and water collect and where brushes rarely reach. The lip and the valve area are the usual places for kerb damage. Check that the original caps are present, and that the bolts and hub rings suit your car if the set came off a different make.

Silver finishes hide wear better, but repairs are harder to colour-match on silver than on black.

Cleaning paired spokes

The double-spoke design is slower to clean than a five-spoke, so a soft, narrow brush and a pH-neutral cleaner are worth having. Sealant helps dust rinse off. When changing tyres, ask the fitter to use stick-on weights on the inner barrel and to tighten the bolts with a torque wrench.

Frequently asked questions

Is the SX cast or flow-formed?

BBS describes it as a cast wheel. Some retailers call it flow-formed, but that is not what the BBS documentation we have seen says.

What finishes were available?

Black and silver finishes were the main options, with names and availability varying by market.

How does the SX compare with the SR?

Both are cast Design Line wheels at similar prices. The SX has double spokes, while the SR has an open centre.

Is the SX hard to clean?

The paired spokes make it slower to clean than a simple five-spoke, but a narrow brush helps.

Related