BBS FI wheel
Illustration of the BBS FI spoke layout (drawn for this site, not a product photo).

Forged one-piece, 2010s

BBS FI wheels

The FI is a one-piece forged wheel BBS designed for powerful sports cars, with a deep twin-spoke face and a weight figure close to that of a racing wheel.

Construction
One-piece forged aluminium
Era
Introduced in the 2010s
Spoke style
Twin spokes forming a Y
Typical cars
Porsche, Ferrari, high-performance coupes
Successor
FI-R

Background

BBS developed the FI for owners of high-powered cars who wanted a wheel lighter than the factory option with a similar or greater load rating. Porsche owners took to it quickly, and the wheel became a familiar sight on 911 and Cayman models as well as on other exotic coupes. The FI was later developed into the FI-R, which uses a deeper face.

Construction

The FI is forged from aluminium in one piece and then CNC machined. Paired spokes run from a compact hub to a thin rim lip, and the spoke backs are milled out. Many versions use a centre-lock style cap or are offered for cars with a real centre-lock hub, depending on market. A one-piece forged wheel needs no assembly bolts and is simpler to keep sealed than a multi-piece RS. Our page on forged and cast wheels explains why forging saves weight.

Fitment

FI sizes were matched to specific cars, often with staggered front and rear widths for rear-drive sports cars. Brake clearance on cars with large ceramic brakes needs particular care, and some fitments require specific spacers or bolts. Sizes and offsets varied by market and model year. See fitment and offset explained for the basics.

Checking an FI is genuine

Genuine FI wheels have BBS markings on the rear face with the model, size and offset, plus test marks. Centre-lock versions have hub machining and drive pin holes that match the car's centre-lock system, and these are hard for copyists to reproduce correctly. Bolt-on versions use a centre cap that sits flush in the hub. Ask for photographs of the back of each wheel and compare the spoke pockets with official images. Identifying BBS wheels explains the general markings.

Why owners choose a forged FI over factory wheels

Factory wheels on high-performance cars are often forged already, so the gain from an FI is smaller than going from a cast wheel to a forged one. Owners usually pick the FI for a combination of lower weight, a different look and BBS's long record with Porsche, which has fitted BBS-made wheels as factory equipment on several models over the years. The deeper style of the later FI-R drew some buyers away, so used FI sets can be good value.

Remember that a forged one-piece wheel is a single part. If one is damaged beyond repair, you need an exact match in size, offset and finish, and finishes change over a model's life. Buying a spare at the same time as the set is one way round this.

Weight and handling

Owners who move from heavier aftermarket wheels to the FI often report lighter steering and a more settled ride over broken surfaces. Coming from factory forged wheels, the change is smaller. Compare published weights for your exact size before deciding what you will gain.

The gain also depends on tyre choice. A heavy run-flat tyre can cancel much of the weight saved by a forged wheel, so consider both together when planning a change.

Things to check on a used set

Many FI sets have spent their life on Porsche 911s and similar cars, often with staggered sizes. Check that front and rear widths match your car, since a set listed for one model may not suit another even with the same bolt pattern. On centre-lock wheels, inspect the drive pin holes and the nut seat for wear or galling, which shows the wheels were fitted without proper lubrication or torque. Low-profile tyres leave the lip exposed, so kerb rash on the outer edge is common and usually cosmetic. Cracks on the inner barrel are rarer but more serious.

Fitting and looking after FI wheels

Centre-lock wheels need the car maker's procedure: correct grease on the threads and seat, a high torque figure and often a specific tool. Have this done by someone who works on these cars regularly. Bolt-on versions need the right bolt length and seat for the hub. Large carbon-ceramic brakes create less visible dust, while steel brakes on these cars can coat the wheels quickly, so clean regularly with a pH-neutral product. Avoid automatic car washes with brushes, which tend to scuff the lip.

Frequently asked questions

Is the BBS FI forged?

Yes, it is a one-piece forged aluminium wheel.

What replaced the FI?

The FI-R developed the design further with a deeper, more concave face.

Is the FI only for Porsche?

No. It was strongly associated with Porsche but fitments were offered for other high-performance cars too.

Are centre-lock versions available?

Some markets offered fitments for cars with centre-lock hubs. Check with an authorised dealer for your specific car.

Related