
Modern RS revival, 2010s onward
BBS Super RS wheels
The Super RS brings the look of the 1980s BBS RS to modern cars, with larger sizes and a construction suited to current brakes and wheel loads.
- Inspiration
- The classic three-piece BBS RS
- Construction
- Multi-piece with a bolted centre and polished lip
- Era
- 2010s onward
- Design
- Cross-spoke mesh centre with visible rim bolts
- Sizes
- Modern diameters; offered sizes varied by market
Why the Super RS exists
The BBS RS was introduced in the early 1980s and became the defining BBS road wheel: a mesh centre, a ring of bolts and a deep polished lip. It was made mostly in smaller diameters that suited the cars of its time. As cars moved to larger brakes and bigger wheels, owners who wanted the RS look struggled to find sizes that fitted.
The Super RS answers that problem. It keeps the visual language of the RS, with its cross-spoke centre, exposed bolts and stepped lip, and offers it in diameters and offsets that work on modern cars. It is a new design, not a reissue, so it should not be confused with original RS wheels or with the later RS II.
Construction
The Super RS is a multi-piece wheel. The mesh centre is bolted to the rim, and the bolts sit around the outer edge of the centre as on the original RS. Details of the materials and processes depend on the production source and period, so check the markings and documentation of a particular set if that matters to you, for example for motorsport use. The forged versus cast guide explains why construction affects weight and strength.
As with any multi-piece wheel, the joints are sealed and need to stay that way. A slow leak on a used set usually points to a seal or bolt issue rather than a damaged rim.
Fitment
Sizes, widths, offsets and bolt patterns varied by market. Lip depth depends on width and offset, so the same diameter can look shallow on a front axle and deep on a wide rear. Because the centre is close to the brakes on some sizes, check caliper clearance before you buy, especially with aftermarket brakes.
- Take size, offset and PCD from the wheel markings.
- Check the centre bore and use hub rings if needed.
- Trial fit one wheel with the brakes in place.
See fitment and offset explained for more.
Telling a Super RS from an original RS or a copy
An original RS is usually a smaller-diameter wheel made decades ago, with markings typical of its period. A Super RS is newer, generally in larger sizes, and carries its own model markings on the back of the centre. If a seller lists a large-diameter "RS", check the markings, because it may be a Super RS or a copy.
Copies of the RS look are common. On a genuine wheel, factory markings are crisp and complete, the bolts are uniform, spoke crossings are cleanly finished and the lip is properly polished. Caps alone prove nothing. The identification guide lists further checks.
Buying used
- Check the lip for kerb damage and the barrel for flat spots.
- Inspect the back of the centre and the spoke roots for cracks.
- Look at the bolts and sealant line for corrosion, missing hardware or signs of a poor reseal.
- Ask whether the wheels have been split, refinished or straightened, and by whom.
- Check runout on a balancer before buying tyres.
More in the used BBS buying guide.
Refurbishment and care
The best refinishing results come from splitting the wheel, refinishing each part, fitting new hardware and resealing. That needs a shop that knows multi-piece wheels; refurbishing multi-piece wheels explains what to ask. For routine washing, use a soft brush and a pH-neutral cleaner to reach the mesh corners and the bolt heads, and avoid strong acids. A bare polished lip will need occasional metal polish to stay bright. See caring for BBS wheels.
Is a Super RS right for your car?
If you own a classic car that suits small wheels, an original RS is the authentic choice. If your car is newer and needs a larger diameter for its brakes, the Super RS gives you the same look in a size that fits. The LM-R is another modern BBS mesh option, with a two-piece construction and a different centre.
Tyres and daily use
Because the Super RS comes in larger sizes, it is often fitted with low-profile tyres, which give the lip little protection from kerbs. Choosing a tyre with a protective rim flange and an offset that keeps the lip inside the arch line helps. Use a tyre fitter who has worked on multi-piece wheels and protects the polished lip from the machine.
In winter, salt attacks bare polished aluminium and exposed bolt heads. Many owners keep a separate set of wheels for the colder months and store the Super RS clean and dry. Before refitting in spring, check the bolts and the seal line and confirm the wheels hold pressure.
Frequently asked questions
Is the Super RS the same as the original RS?
No. The Super RS is a newer design inspired by the 1980s RS, made in larger sizes for modern cars.
How can I tell a Super RS from a large copy?
Check for clear factory markings on the back of the centre, uniform bolts, cleanly finished spoke crossings and a properly polished lip.
Can a Super RS be refinished?
Yes. A multi-piece expert can split it, refinish the parts and reseal it with new hardware.