
Cross-spoke, classic era
BBS RK wheels
The RK is one of the less documented BBS wheels, a cross-spoke design from the era when mesh faces defined the brand. Details such as sizes and production years are hard to pin down, so this page sticks to what can be checked on the wheel itself.
- Spoke style
- Cross-spoke mesh
- Era
- Classic BBS mesh period
- Documentation
- Limited; check markings on the wheel
- Related designs
- RS, RG, RX
Background
BBS made its name with cross-spoke mesh wheels in the late 1970s and 1980s, starting with the three-piece RS and continuing with one-piece designs such as the RG and RX. The RK belongs to this family of mesh designs. Public information on it is thin compared with the RS or RG, and it does not appear widely in catalogues that are easy to find today. For the wider story see BBS history.
Construction
We cannot confirm whether every RK was one-piece or multi-piece, so check the wheel itself. A multi-piece wheel has a ring of small bolts around the rim joining the centre to the barrel, as on the RS. A one-piece wheel has a continuous casting from face to barrel. Our guide to refurbishing three-piece wheels covers the multi-piece case.
Identifying an RK
Look on the back of the centre for the BBS name and a part number. BBS part numbers on wheels of this era often begin with RS, RG or similar prefixes followed by digits, and the size and offset are stamped or cast nearby. The model name on the wheel may differ from the name a seller uses, so trust the casting over the listing. Our guide to identifying BBS wheels explains how to read these markings.
If the markings do not match any known BBS reference, ask in an owners' forum or contact a BBS dealer with clear photos before paying a premium.
Fitting an older mesh wheel to a modern car
Older BBS mesh wheels were designed for the cars of their time, so the bolt pattern, centre bore and offset may not suit a modern car. Adapters and spacers can bridge the gap, but they add another joint to check and can change the loading on wheel bearings. Brake clearance is often the limit, since modern calipers are much larger than those of the 1980s and 1990s.
On a period car, check that the size suits the original suspension and that tyres in that size are still available in a type you are happy to use. The offset guide explains how to compare an older wheel with your car's needs.
Asking the right questions
When contacting a seller, ask for the part number, size and offset from the wheel, clear photos of the face and rear, and a note of any repairs or refinishing. A seller who knows the wheels will usually have this to hand.
Ask too whether the wheels have been on a car recently. Wheels that sat in storage for years may need new valves, and multi-piece versions may need resealing before they hold air reliably.
Buying a used RK
Any RK on the market now is an older wheel, so assume it has been refinished at least once and ask how. Check the spokes for corrosion where they join the rim and around the valve hole, which are typical places on old mesh wheels. If the wheel is multi-piece, look for leaking seals, missing or mismatched rim bolts and signs of a rushed reassembly. Original centre caps can be hard to find, so a set with all four caps is worth more. General advice is in buying used BBS wheels.
Before paying a premium, compare the part number on the back of the centre with known BBS references and ask in an owners' forum.
Refurbishing and care
Mesh faces take patience to refinish. Stripping and painting between the spokes by hand is slow, and powder coating needs care to avoid filling the fine detail. Choose a refinisher who has handled BBS mesh wheels before.
If you are restoring a car of the period, think about whether the RK suits it. BBS mesh wheels were widely fitted as period upgrades to German cars in the 1980s and 1990s.
To clean a mesh wheel, use a soft brush that reaches the inside corners of each cross, and rinse thoroughly so cleaner does not dry in the gaps.
Frequently asked questions
What kind of wheel is the BBS RK?
It is a cross-spoke mesh design from the BBS classic era. Documentation is limited, so check the wheel's markings for exact details.
Is the RK the same as the RS?
No. They share the mesh look, but the RS is a well-documented three-piece wheel. Check the part number on the back of the centre.
How do I find the size of an RK?
Size and offset are usually stamped or cast on the back of the centre or inside the barrel.
Are replacement centre caps available?
Caps from other BBS mesh wheels sometimes fit, but sizes vary. Measure before buying.