
Forged one-piece, Japan
BBS RG-R wheels
The RG-R is a one-piece die-forged wheel from BBS Japan. Its eight spokes cross in pairs to give a light, open version of the mesh idea, and it has been offered for many years in sizes from 17 to 19 inches.
- Construction
- One-piece die-forged aluminium
- Spokes
- Eight, cross pattern
- Made in
- Japan
- Sizes
- 17, 18 and 19 inch
- Typical use
- Sports cars, hot hatches, track days
Origins and place in the range
The RG-R takes the cross-spoke idea from the older RG and the RS and reduces it to eight spokes in a forged wheel. BBS Japan has kept the model in production for a long time and expanded the line-up in the early 2020s, around the time it introduced the RE-V7.
It sits in the same forged family as the RE-V and the RI-A. Of these, the RG-R is often the choice for owners of smaller, lighter cars who want a forged wheel with a traditional BBS look.
Construction
BBS describes the RG-R as die-forged. A heated billet of aluminium alloy is pressed in a closed die until it takes the rough shape of the wheel, then spun, heat treated and machined. Forged aluminium has a dense grain structure that runs with the shape of the spokes, so less metal is needed for a given strength. Our forged versus cast guide covers the process.
The eight spokes are machined on their faces, and the crossing points stand slightly proud, which gives the face depth. Because it is a monoblock, the width and offset cannot be changed after manufacture.
Sizes and fitment
The RG-R comes in 17, 18 and 19 inch diameters, with widths and offsets chosen for specific cars. Typical fitments include the Mazda MX-5, Toyota GR86 and Subaru BRZ, Honda Civic Type R, Volkswagen Golf GTI and R, and BMW and Porsche models. The 17 inch sizes are popular for track use because they allow taller tyre sidewalls and less costly tyres.
Bolt patterns and centre bores match the car for which each size was made. Check whether the size you want needs hub rings, and confirm brake clearance if your car has upgraded callipers. See offset explained for how to compare sizes.
How to identify a genuine RG-R
The RG-R carries its markings on the back of the centre, inside the ring formed by the spoke roots. A genuine wheel shows the BBS name, size, inset, bolt pattern and model code, along with the JWL and VIA marks expected on a wheel from BBS Japan. Because the wheel is die forged, the back is machined smooth and the lettering is crisp.
The eight crossing spokes are a simple shape to copy, so look closely at where each pair meets. On a genuine RG-R the crossing points are machined cleanly and stand a little proud of the spokes. Copies often blur this detail. A 17 inch RG-R should feel noticeably light in the hand; a heavy wheel is a warning sign. The identification guide shows typical BBS marks.
Buying used
Because the RG-R has been made for so long, used sets range from nearly new to well worn track wheels. Ask how the car was used, whether any wheel has been repaired, and whether the tyres were changed on a touchless machine. Tyre levers can gouge the inner lip of a machined forged wheel.
On the 17 inch sizes popular for track work, check the rim edge for flat spots from kerbs and the area around each crossing point for cracks. Run each wheel on a balancer. A wheel that has been welded or heat straightened should be rejected, since that changes the properties of the forged alloy. Many RG-Rs were bought for small cars like the MX-5, so make sure the bolt pattern and centre bore match your car. See buying used BBS wheels.
Choosing a size
Owners of light cars often pick the smallest diameter that clears their brakes. A 17 inch RG-R on an MX-5 or GR86 allows a taller tyre and keeps tyre costs down, which matters if the car does a lot of track days. The 18 and 19 inch sizes suit larger cars and bigger callipers. Whatever the diameter, confirm the inset against the car maker's figure before ordering, and check that the tyre width you want is suitable for the rim width.
Care
Clean with a pH-neutral product and a soft brush. The crossing spokes create small pockets that hold brake dust, so rinse them well. After track days, inspect the spoke roots and hub area for cracks and keep wheel nuts at the correct torque. Caring for BBS wheels has more.
Frequently asked questions
How many spokes does the RG-R have?
Eight, arranged in a crossing pattern.
Is the RG-R forged?
Yes. It is a one-piece die-forged aluminium wheel made in Japan.
What sizes is the RG-R available in?
It has been offered in 17, 18 and 19 inch diameters, with widths and offsets set by vehicle.
Is the RG-R related to the old RG?
It borrows the cross-spoke idea and the name, but the old RG was a cast wheel with a full mesh face. The RG-R is forged and has eight spokes.